|
| |   
| New - KMD 250
Multi-Function Display |
 The
KMD 250 Multi-Function Display (MFD) is the newest addition to the
popular KMD 550 and 850 MFDs, part of the Bendix/King Integrated Hazard
Avoidance System (IHAS) family. With traffic and data link weather
capability, this 3 inch high moving map display with terrain and an
optional internal VFR GPS is an ideal safety solution for any General
Aviation aircraft. It features a sharp 3.8-inch-diagonal active matrix
liquid crystal display (AMLCD).
|
| Realtime Weather With Data Link
Weather Services |
Bendix/King Data Link Weather gives pilots the "big
picture" of weather in a user-friendly manner. Near-real-time
weather maps from powerful ground-based NEXRAD radars and other  information
such as METARs and TAFs are broadcast on the Bendix/King network, then
received by Bendix/King's new KDR 510 VDL Mode 2 Data Link Receiver.
NEXRAD data is continuously displayed in 4-km by 4-km resolution on the
KMD 550 or KMD 850 Multi-Function Display.
With Bendix/King Data Link Weather, general aviation pilots will have
an unprecedented level of situational awareness and flight safety.
|
KT76A Crown
Series Transponder comes complete w/ tray, install kit & antenna.
6.25"W x 1.63 H x 10D.
KT 71 Panel-Mounted Mode A/C
Transponder
Provides digital display of encoded altitude and
push button selection of VFR code. Same as KT 70 except without Mode S
capability. TSO'd.
3.90lbs/1.77kg.
Dimensions: H/W/D - 1.63/6.25/10.0 in.
Power Required: 11-33vdc, 35 watts max.
Silver Crown Plus version with same features as
above, except new-look faceplate and backlighting to match modernized Silver
Crown Plus line.
KT 76C Transponder, Class
1A, Mode A/C w/Digital Display
8-button direct-entry 4096 codes, altitude
reporting capability, 11-33v, panel-mounted, 200 watts. Modernized Silver
Crown Plus styling. Operates up to 35,000 ft. TSO'd.
3.10lbs/1.41kg
Dimensions: H/W/D - 1.63/6.25/10.73 in.
Power Required: 1.8a
KMA 24 Audio Control
Separate alternate action push buttons and
isolation amplifiers for speaker and headphones. Integral marker receiver and
lights. Switch positions: Tel, 2 COMMs, 2 NAVs, DME, ADF, AUTO, MKR, TSO'd.
(-00)
1.70lbs/.77kg.
KMA 28
Audio Control Panel come w/tray, install kit. 6.25"W x 1.3"H x
6.8"D.
KN53 NAV
Receiver comes w/tray, install kit.
6.25"W x 1.3H x 9.75" D.
KX 155 NAV/COMM Transceiver
Solid state, 760 frequency COMM transceiver,
200-channel NAV receiver, 40-channel glideslope receiver, 10-watts, 14v or 28v.
Simultaneous, digital, gas-discharge display of active and standby NAV and COMM
frequencies. Push button frequency flip-flop. Built-in audio amplifier. Meets
DO-156 frequency selectivity requirements, TSO'd.
5.50lbs/2.49kg
Dimensions: H/W/D - 2.05/6.25/10.16 in.
Power Required: 14v Xmit-7.5a, Rec-.7a
28v
Xmit-4.5a, Rec-.4a
KX 155-38/39 same as above but without
40-channel glideslope receiver.
KX 125 NAV/COMM Transceiver
Solid state, 760-frequency COMM transceiver,
200-channel NAV receiver. Simultaneous digital, LCD display of active and
standby NAV and COMM frequencies. Push button frequency flip-flop. Built-in LCD
Course Deviation Indicator. Meets DO-156 frequency selectivity requirements,
TSO'd. 5 watts. 14v only.
3.88lbs/1.76kg
Dimensions: H/W/D - 2.0/6.25/10.16 in.
Power Required: Xmit 6.0a, Rec .4a
KLX 135A GPS/COMM Transceiver
Built-in moving map displays shows airports,
navaids and special use airspace boundaries. Includes audio isolation and
speaker amplifier. Choice of Americas, Atlantic, or Pacific data base. GPS
section for VFR navigation only. RS-232 output provides nav and flight plan data
for external moving maps. Includes external data port.
4.0lbs/1.8kg
Dimensions: H/W/D - 2.0/6.25/11.38 in.
Power Required: 14vdc, 1.1A (rec.), 6.0A max. (xmit)
PC interface cable for data base updates.
(050-03213-0000)
KX 155A NAV/COMM Transceiver
Silver Crown Plus VHF NAV/COM with
32-programmable COM channels, remote channel increment capability, stuck mic
alert & shutdown, Bearing-TO and Radial-FROM modes, internal CDI, and
elapsed timer. Improved backlighting of knobs and buttons, TSO'd. 10 Watts, 28V.
5.50lbs/2.49kg
Dimensions: H/W/D - 2.0/6.25/10.16
Power Required: 28v Xmit-4.5a, Rec-.4a
KX 165 NAV/COMM Transceiver
Solid state, 760 frequency COMM transceiver,
200-channel NAV receiver, 40-channel glideslope receiver and built-in VOR
converter, 10-watts, 14v or 28v. Simultaneous, digital, gas-discharge display of
active and standby NAV and COMM frequencies or select digital display of radial
from the VOR or VORTAC in lieu of standby NAV frequency. Push button frequency
flip-flop. Meets DO-156 frequency selectivity requirements. TSO'd.
5.65lbs/2.56kg
Dimensions: H/W/D - 2.05/6.25/10.16 in.
Power Required: 14v Xmit-7.5a, Rec-.7a
28v
Xmit-4.5a, Rec-.4a
KLN 90B IFR-Approach Capable GPS
(BRNAV Compliant)
TSO C129, Class A-1 and STC approved for IFR en
route, terminal, and non-precision approach use. Unique 3-inch “split
screen” CRT display. Built-in moving map graphics shows nearby airports and
navaids. RS 232 and ARINC 429 output provides nav and flight plan data for
external moving maps. Complete Americas or International database. 14v/28v
Lighting (5v Lighting, and gray bezel-versions extra)
6.20 lbs/2.82 kg
Dimensions: H/W/D - 2.0/6.31/13.15 in.
Power Reqd. 11-33 vdc 2.5a max
KLN 94 Color GPS Receiver
Bendix/King KLN 94 color GPs navigator/moving map
display is a panel mounted IFR (C-129A) certified unit. Designed to be a direct
replacement for the KLN 89B, the KLN 94 will let you upgrade to color while
maintaining your panel's integrity.
The KLN 94 features an enhanced version of the
easy-to-use operating system found in the KLN 89B. The comprehensive
aeronautical database includes airports, VOR's, NDB's, intersections and special
use airspace. The supplemental cartographic database includes rivers, roads,
lakes, cities, railroad tracks, boundaries and towers to enhance situational
awareness.
Other KLN 94 features include "vector to
final" approach capability, a dedicated "Range" and
"Map" menu button for map access and tailoring. The dedicated
"Procedures" button simplifies loading of approaches (including ILS
approaches). The Quick-Tune feature automatically loads frequencies into the KX
155A NAV/COMM. Self-contained annunciators reduce the installation cost of the
KLN 94
Dimensions: H/W/D - 2.0/6.31/10.72 in.
KMD 150 Multifunction Display
Navigator with Moving Map
GPS moving map for precision navigation. Offers
world-wide navigational capability with just three separate data modules
covering the Americas, Atlantic International, and Pacific International with
Jeppesen data. Features interrogation, trip/fuel planning, vertical navigation,
wind calculation, auto zoom, extended track, nearest airports and navaids,
interface capability to the BFGoodrich WX 500 Stormscope.
3.3lbs/1.5kg
Dimensions: Width 6.2 in. (15.8 cm) Height: 4.0 in. (10.1 cm)
Screen Size: 5" (12.7 cm) diagonal
INDICATORS
KI 227 Slaved Magnetic
Heading Indicator
The KI 227-00 single-needle ADF
Indicator has a heading knob for manually synchronizing the heading to
match the direcitonal gyro heading. The optional KI 227-01 has a
synchronized compass card which is driven by the KCS 55A Compass
System.
.70lbs/.32kg
Dimensions: H/W/L - 3.25/3.25/2.75 in.
|
KI 228 Slaved Dual
Pointer ADF
The KI 228-00 dual -needle ADF
Indicator accepts inputs from two separate ADF receivers and has a
heading knob for manually synchronizing the heading to match the
directional gyro heading. An optional KI 228-01, similar in operation
to the KI 227-01 is also available.
.91lbs/.41kg.
Dimensions: H/W/L - 3.25/3.254/4.68 in.
|
|
KDI 572 DME Indicator
Simultaneous display of distance, ground
speed and time-to-station.
|
KDI 573 DME Slave Indicator
For use as second display with KDI 572 or
KDI 574 for simultaneous DME display for copilot or crew. No selector
switch. TSO'd .70lbs/.32kg
Power Required: From KN 63/KDM 706/KTU 709
|
|
KDI 574 DME
Master Indicator
For use with KDM 706, KN 63 digital DME
and KTU 709 TACAN systems. Features simultaneous gas discharge display
of distance, ground speed and TTS, plus annunciation of NAV 1, Hold, NAV
2 and RNAV. No selector switch. TSO'd.
.070lbs/.32kg
Power Required: From KN 63/KDM 706/KTU 709
|
KI 229 Radio
Magnetic Indicator (RMI)
Compatible with NAVs/RNAVs/ADF. Requires
input from ARINC Compass System. TSO'd
2.80lbs/1.30kg
Dimensions: H/W/L - 3.25/3.25/8.0 in.
Power Required: 11-33vdc-.75a 26vac-4.0a
|
KNI 582 RMI
Double Needle
Dual pointer, accepts AC SIN/COS, DC
SIN/COS, Serial and VOR Composite inputs. TSO'd
3.00lbs/1.36kg
Dimensions: H/W/L - 3.25/3.25/8.0 in.
Power Required: 28v-.4a, 26 vac-6 va
|
KI 202 VOR/LOC Indicator
without NAV Converter
Rectilinear, internally lighted for use
with KX 165. TSO'd.
1.30lbs/.59kg
Dimensions: H/W/L - 3.25/3.25/8.06 in.
Power Required: 14v - .28a, 28v - .18a
|
|
KI 203 VOR/LOC
Indicator
With integral VOR/LOC Converter,
rectilinear, internally lighted, for use with KN 53, KX 155. TSO'd.
1.60lbs/.73kg
Dimensions: H/W/L - 3.25/3.25/9.85 in.
Power Required: 14v - .28a, 28v - .18a
|
KI 204 VOR/LOC/
Glideslope Indicator
With integral VOR/LOC Converter,
rectilinear, internally lighted, for use with
KN 53, KX 155. TSO'd
1.70lbs/.78kg
Dimensions: H/W/L - 3.25/3.25/9.85 in.
Power Required: 14v - .28a, 28v -.18a
With course datum synchro: Suggested R
1.80lbs/.82kg
|
|
KI 206 VOR/LOC
Glideslope Indicator
Rectilinear, internally lighted for use
with KNS80/81, KX 165. TSO'd
1.30lbs/.59kg
Dimensions: H/W/L - 3.25/3.25/8.06 in.
Power Required: 14v - .28a, 28v - .14a
KI 206-05 with Course datum
synchro:
1.40lbs/.63kg
KI 206-12 for use with KNR
634 VOR/LOC/GS/MB Receiver:
1.30lbs/.59kg
KI 206-10 for use with KNR
634 VOR/LOC/GS/MB Receiver with course datum synchro: 1.40lbs/.63kg
|
KI 207 VOR/LOC/Glideslope
Repeater Indicator
Same as KI 206, without 30 cycle re-solver
and OBS. TSO'd.
1.00lbs/.40kg
Dimensions: H/W/L - 3.25/3.25/8.06 in.
Power Required: 14v-.20a, 28v - .10a
|
|
KI 208 VOR/LOC Indicator
with VOR/LOC Converter
Internal Lighting, for use with KX 155 or
KX 155A. 1.00lbs/.45kg
Dimensions: H/W/L - 3.25/3.25/8.00 in.
Power Required: .15a
|
KI 208A VOR/LOC Indicator
with VOR/LOC Converter
& GPS Switching Relays
Internal lighting. Internal relays allows
for switching between VHF NAV and GPs For use with KX 155/155A & KLN
89B 1.00lbs/.45kg.
Dimensions: H/W/L - 3.25/3.25/8.00 in.
Power Required: .15a
|
|
KI 209 VOR/LOC/GS
Internal lighting, for use with KX
155 or KX 155A with GS Receiver.
1.20lbs/.54kg
Dimensions: H/W/L - 3.25/3.25/8.00 in.
Power Required: .15a
|
KI209A VOR/LOC/GS
Indicator with VOR/LOC
Converter & GPs
Switching Relays
Internal lighting. Internal relays allows
for switching between VHF VAN and GPs For use with KX 155/155A with GS
Receiver & KLN 89B.1.20lbs/.54kg
Dimensions: H/W/L - 3.25/3.25/8.00 in.
Power Required: .15a
|
{ RETURN TO ALL
AVIONICS }
|
